Library Collection
Print ISSN 1516-1439
Most visited issue
(measured by access to table of contents, abtracts,
html articles and PDF articles)
|
|
|
Most visited issue |
|
* Count started in January , 2000. |
|
|
| Page 1 of 11 | [First] [Previous] [Next] [Last] |
|
nr. of requests |
article reference |
| 15695 |
BIANCHI, Eduardo Carlos, SILVA, Eraldo Jannone da, CEZAR, Fabio Andreassa Guedes
et al. Aspectos microscópicos da influência dos processos de esterilização em pontas diamantadas. Mat. Res.,
2003,
vol.6, no.2, p.203-210. ISSN 1516-1439.
|
| 9827 |
BOTELHO, Edson Cocchieri, SILVA, Rogério Almeida, PARDINI, Luiz Cláudio
et al. A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures. Mat. Res.,
2006,
vol.9, no.3, p.247-256. ISSN 1516-1439.
|
| 9519 |
FURTADO, Heloisa Cunha and MAY, Iain Le. High temperature degradation in power plants and refineries. Mat. Res.,
2004,
vol.7, no.1, p.103-110. ISSN 1516-1439.
|
| 9352 |
SCHNEIDER, Sergio, SCHNEIDER, Sandra Giacomin, SILVA, Helena Marques da
et al. Study of the non-linear stress-strain behavior in Ti-Nb-Zr alloys. Mat. Res.,
2005,
vol.8, no.4, p.435-438. ISSN 1516-1439.
|
| 7716 |
ROGERO, Sizue Ota, LUGãO, Ademar Benévolo, IKEDA, Tamiko Ichikawa
et al. Teste in vitro de citotoxicidade: estudo comparativo entre duas metodologias. Mat. Res.,
2003,
vol.6, no.3, p.317-320. ISSN 1516-1439.
|
| 7584 |
SEIDEL, Juliana Matos and MALMONGE, Sônia Maria. Synthesis of polyHEMA hydrogels for using as biomaterials. Bulk and solution radical-initiated polymerization techniques. Mat. Res.,
2000,
vol.3, no.3, p.79-83. ISSN 1516-1439.
|
| 7572 |
COTA, André Barros, OLIVEIRA, Fernando Lucas Gonçalves e, BARBOSA, Anderson Luiz da Rocha e
et al. Microstructure and mechanical properties of a microalloyed steel after thermal treatments. Mat. Res.,
2003,
vol.6, no.2, p.117-121. ISSN 1516-1439.
|
| 7305 |
MELO, Rogério A.A., GIOTTO, Marcus V., ROCHA, João
et al. MCM-41 ordered mesoporous molecular sieves synthesis and characterization. Mat. Res.,
1999,
vol.2, no.3, p.173-179. ISSN 1516-1439.
|
| 7292 |
CAMERUCCI, M.A., URRETAVIZCAYA, G. and CAVALIERI, A.L. Evaluacion termica, mecanica y electrica de materiales compuestos cordierita-mullita. Mat. Res.,
2000,
vol.3, no.4, p.124-130. ISSN 1516-1439.
|
| 7234 |
BIANCHI, Eduardo Carlos, AGUIAR, Paulo Roberto de, POGGI, Márcio Rodrigo
et al. Estudo do desgaste abrasivo das resinas compostas disponíveis no mercado brasileiro. Mat. Res.,
2003,
vol.6, no.2, p.255-264. ISSN 1516-1439.
|
| 7115 |
PAIVA, Jane Maria Faulstich de, MAYER, Sérgio and REZENDE, Mirabel Cerqueira. Comparison of tensile strength of different carbon fabric reinforced epoxy composites. Mat. Res.,
2006,
vol.9, no.1, p.83-90. ISSN 1516-1439.
|
| 7081 |
REIS, Elizabeth Fonseca dos, CAMPOS, Fábia S., LAGE, Andrey Pereira
et al. Synthesis and characterization of poly (vinyl alcohol) hydrogels and hybrids for rMPB70 protein adsorption. Mat. Res.,
2006,
vol.9, no.2, p.185-191. ISSN 1516-1439.
|
| 7052 |
SILVA, M.H. Prado da, SOARES, G.A., ELIAS, C.N.
et al. Surface analysis of titanium dental implants with different topographies. Mat. Res.,
2000,
vol.3, no.3, p.61-67. ISSN 1516-1439.
|
| 7012 |
VILLAQUIRáN, Claudia, GóMEZ, Marisol and LUIGGI, Ney. Calculo de Parámetros Electrónicos Para el Grafito Bernal. Mat. Res.,
2002,
vol.5, no.2, p.155-163. ISSN 1516-1439.
|
| 6712 |
DE MICHELI, Lorenzo, AGOSTINHO, Silvia Maria Leite, TRABANELLI, Giordano
et al. Susceptibility to Stress Corrosion Cracking of 254SMO SS. Mat. Res.,
2002,
vol.5, no.1, p.63-69. ISSN 1516-1439.
|
| 6670 |
RAMOS, Juliana Panazzolo, BENITEZ CATIRSE, Alma Blásida Concepción Elizaur and CORONA, Silmara Aparecida Milori. Evaluación de la dureza superficial en amalgamas en función de tipos de aleaciones, momentos y tipos de pulimentos. Mat. Res.,
2003,
vol.6, no.3, p.433-437. ISSN 1516-1439.
|
| 6651 |
GUTIéRREZ-SALAZAR, Maria del Pilar and REYES-GASGA, Jorge. Microhardness and chemical composition of human tooth. Mat. Res.,
2003,
vol.6, no.3, p.367-373. ISSN 1516-1439.
|
| 6633 |
ORTIZ, A., MENDOZA, M. and RODRíGUEZ PAEZ, J.E. Naturaleza y formación de los complejos intermedios del sistema SnCl2 - NH4OH - H2O. Mat. Res.,
2001,
vol.4, no.4, p.266-272. ISSN 1516-1439.
|
| 6629 |
FIORELLI, Juliano and DIAS, Antonio Alves. Analysis of the strength and stiffness of timber beams reinforced with carbon fiber and glass fiber. Mat. Res.,
2003,
vol.6, no.2, p.193-202. ISSN 1516-1439.
|
| 6504 |
SANTIAGO, Diego, LOMBERA, Guillermo, URQUIZA, Santiago
et al. Modelado numérico del proceso de pultrusión en materiales compuestos. Mat. Res.,
2003,
vol.6, no.4, p.583-589. ISSN 1516-1439.
|
| 6315 |
FRANCO JR., Adonias Ribeiro, PINTAúDE, Giuseppe, SINATORA, Amilton
et al. The use of a vickers indenter in depth sensing indentation for measuring elastic modulus and vickers hardness. Mat. Res.,
2004,
vol.7, no.3, p.483-491. ISSN 1516-1439.
|
| 6175 |
MONTEIRO, Valéria Fernandes, NATAL, Aline Martins Duboc, SOLEDADE, Luís Edmundo Bastos
et al. Morphological analysis of polymers on hair fibers by SEM and AFM. Mat. Res.,
2003,
vol.6, no.4, p.501-506. ISSN 1516-1439.
|
| 5957 |
SOUZA, M.F. de, BATISTA, P.S., REGIANI, I.
et al. Rice hull-derived silica: applications in Portland cement and mullite whiskers. Mat. Res.,
2000,
vol.3, no.2, p.25-30. ISSN 1516-1439.
|
| 5835 |
JESUíNO, G.A., RIBEIRO, L.M.F., NAKAZATO, R.Z.
et al. Propriedades mecânicas e resistência à corrosão da liga Ti-4Al-4V obtida da reciclagem da liga Ti-6Al-4V. Mat. Res.,
2001,
vol.4, no.2, p.63-69. ISSN 1516-1439.
|
| 5697 |
CUNHA, Fernanda Oliveira Vieira da, MELO, Diogo Henrique Roesler, VERONESE, Vinicius Bassanesi
et al. Study of castor oil polyurethane - poly(methyl methacrylate) semi-interpenetrating polymer network (SIPN) reaction parameters using a 2³ factorial experimental design. Mat. Res.,
2004,
vol.7, no.4, p.539-543. ISSN 1516-1439.
|
| 5640 |
TARPANI, José R., BRAZ, Maria H.P., BOSE FILHO, Waldek W.
et al. Microstructural and Fractographic Characterization of a Thermally Embrittled Nuclear Grade Steel: Part II - Quenching and Tempering. Mat. Res.,
2002,
vol.5, no.3, p.365-371. ISSN 1516-1439.
|
| 5581 |
RODRíGUEZ-PáEZ, J.E., VILLAQUIRáN, C. and COBO, J. Estudio de la formacion de los complejos intermedios durante la sintesis de alumina. Mat. Res.,
2001,
vol.4, no.4, p.255-264. ISSN 1516-1439.
|
| 5410 |
REIS, João Marciano Laredo dos. Mechanical characterization of fiber reinforced Polymer Concrete. Mat. Res.,
2005,
vol.8, no.3, p.357-360. ISSN 1516-1439.
|
| 5335 |
BIANCHI, Eduardo Carlos, MONICI, Rodrigo Daun, SILVA, Eraldo Jannone da
et al. Análise do comportamento da microestrutura de materiais endurecidos retificados com rebolos de CBN. Mat. Res.,
2000,
vol.3, no.4, p.147-154. ISSN 1516-1439.
|
| 5316 |
CAMPOS, Cristiane Inácio de and LAHR, Francisco Antonio Rocco. Production and characterization of MDF using eucalyptus fibers and castor oil-based polyurethane resin. Mat. Res.,
2004,
vol.7, no.3, p.421-425. ISSN 1516-1439.
|
| 5169 |
SANTOS, P. Souza, SANTOS, H. Souza and TOLEDO, S.P. Standard transition aluminas. Electron microscopy studies. Mat. Res.,
2000,
vol.3, no.4, p.104-114. ISSN 1516-1439.
|
| 5125 |
MORAES, Maria Cecilia Corrêa de Sá e Benevides de, ELIAS, Carlos Nelson, DUAILIBI FILHO, Jamil
et al. Mechanical properties of alumina-zirconia composites for ceramic abutments. Mat. Res.,
2004,
vol.7, no.4, p.643-649. ISSN 1516-1439.
|
| 5083 |
GUIMARãES, V.A., HEIN, L.R.O. and ZANGRANDI FILHO, J. Sistema de baixo custo para nucleação de pré-trincas por fadiga em corpos de prova de tenacidade à fratura. Mat. Res.,
2001,
vol.4, no.3, p.205-209. ISSN 1516-1439.
|
| 4930 |
BAKKER, Wate. High temperature corrosion in gasifiers. Mat. Res.,
2004,
vol.7, no.1, p.53-59. ISSN 1516-1439.
|
| 4900 |
NEVES, Daniel Leite Cypriano, SEIXAS, Jansen Renato de Carvalho, TINOCO, Ediberto Bastos
et al. Stress and integrity analysis of steam superheater tubes of a high pressure boiler. Mat. Res.,
2004,
vol.7, no.1, p.155-161. ISSN 1516-1439.
|
| 4875 |
VOGELSANGER, Nilton, FORMOLO, Michele Cristina, PEZZIN, Ana Paula Testa
et al. Blendas biodegradáveis de poli(3-hidroxibutirato)/poli(e-caprolactona): obtenção e estudo da miscibilidade. Mat. Res.,
2003,
vol.6, no.3, p.359-365. ISSN 1516-1439.
|
| 4748 |
CRUZ, Ana Milena, AVILA, Humar, RODRíGUEZ-PáEZ, Jorge Enrique
et al. Sintesis de ceramicos de ZnO dopados con praseodimio y cobalto. Mat. Res.,
2003,
vol.6, no.2, p.211-217. ISSN 1516-1439.
|
| 4704 |
ARASHIRO, Emerson Y. and DEMARQUETTE, Nicole R. Use of the pendant drop method to measure interfacial tension between molten polymers. Mat. Res.,
1999,
vol.2, no.1, p.23-32. ISSN 1516-1439.
|
| 4677 |
MATLOCK, David K., ALOGAB, Khaled A., RICHARDS, Mark D.
et al. Surface processing to improve the fatigue resistance of advanced bar steels for automotive applications. Mat. Res.,
2005,
vol.8, no.4, p.453-459. ISSN 1516-1439.
|
| 4636 |
PAIVA, Jane Maria Faulstich de, MAYER, Sergio and REZENDE, Mirabel Cerqueira. Evaluation of mechanical properties of four different carbon/epoxy composites used in aeronautical field. Mat. Res.,
2005,
vol.8, no.1, p.91-97. ISSN 1516-1439.
|
| 4620 |
SILVA, Marcelo Henrique Prado da, LEMOS, Alexandra Fernandes, FERREIRA, José Maria da Fonte
et al. Mechanical characterisation of porous glass reinforced hydroxyapatite ceramics: Bonelike®. Mat. Res.,
2003,
vol.6, no.3, p.321-325. ISSN 1516-1439.
|
| 4548 |
NASCIMENTO, Marcelino P., TORRES, Marcelo A.S., SOUZA, Renato C.
et al. Effect of a Shot Peening Pre Treatment on the Fatigue Behaviour of Hard Chromium on Electroless Nickel Interlayer Coated AISI 4340 Aeronautical Steel. Mat. Res.,
2002,
vol.5, no.2, p.95-100. ISSN 1516-1439.
|
| 4498 |
TOMBA MARTINEZ, A.G. and CAVALIERI, A.L. Análisis por elementos finitos de alúmina sometida a esfuerzos mecánicos y térmicos. Mat. Res.,
2001,
vol.4, no.1, p.07-12. ISSN 1516-1439.
|
| 4434 |
CASSANELLI, A., MáRQUEZ, A., LOMBERA, G.
et al. Modelado numérico del socavado lateral en procesos de soldadura. Mat. Res.,
2003,
vol.6, no.1, p.91-95. ISSN 1516-1439.
|
| 4373 |
FOLGUERAS, Luiza de Castro, NOHARA, Evandro Luis, FAEZ, Roselena
et al. Dielectric microwave absorbing material processed by impregnation of carbon fiber fabric with polyaniline. Mat. Res.,
2007,
vol.10, no.1, p.95-99. ISSN 1516-1439.
|
| 4344 |
DIAS, Fabricio Moura and LAHR, Francisco Antonio Rocco. Alternative castor oil-based polyurethane adhesive used in the production of plywood. Mat. Res.,
2004,
vol.7, no.3, p.413-420. ISSN 1516-1439.
|
| 4343 |
COSTA, Michelle Leali, BOTELHO, Edson Cocchieri, PAIVA, Jane Maria Faulstich de
et al. Characterization of cure of carbon/epoxy prepreg used in aerospace field. Mat. Res.,
2005,
vol.8, no.3, p.317-322. ISSN 1516-1439.
|
| 4312 |
PARDINI, Luiz Claudio and MANHANI, Luis Guilherme Borzani. Influence of the Testing Gage Length on the Strength, Young's Modulus and Weibull Modulus of Carbon Fibres and Glass Fibres. Mat. Res.,
2002,
vol.5, no.4, p.411-420. ISSN 1516-1439.
|
| 4302 |
GAO, Wei and LI, Zhengwei. Nano-structured alloy and composite coatings for high temperature applications. Mat. Res.,
2004,
vol.7, no.1, p.175-182. ISSN 1516-1439.
|
| 4273 |
CAMARGO, Pedro Henrique Cury, SATYANARAYANA, Kestur Gundappa and WYPYCH, Fernando. Nanocomposites: synthesis, structure, properties and new application opportunities. Mat. Res.,
2009,
vol.12, no.1, p.1-39. ISSN 1516-1439.
|
| 4230 |
MANCINI, Sandro Donnini and ZANIN, Maria. Recyclability of PET from virgin resin. Mat. Res.,
1999,
vol.2, no.1, p.33-38. ISSN 1516-1439.
|
| 4223 |
TREZZA, Mónica Adriana and SCIAN, Alberto Néstor. Estudio comparativo de clinkers producidos con diferentes reemplazos de combustibles residuales. Mat. Res.,
2003,
vol.6, no.2, p.295-303. ISSN 1516-1439.
|
| 4202 |
INNOCENTINI, Murilo D.M., SALVINI, Vânia R., MACEDO, Alvaro
et al. Prediction of ceramic foams permeability using Ergun's equation. Mat. Res.,
1999,
vol.2, no.4, p.283-289. ISSN 1516-1439.
|
| 4184 |
ALONSO-FALLEIROS, Neusa and WOLYNEC, Stephan. Correlation between Corrosion Potential and Pitting Potential for AISI 304L Austenitic Stainless Steel in 3.5% NaCl Aqueous Solution. Mat. Res.,
2002,
vol.5, no.1, p.77-84. ISSN 1516-1439.
|
| 4110 |
RIOS, Paulo Rangel, SICILIANO JR, Fulvio, SANDIM, Hugo Ricardo Zschommler
et al. Nucleation and growth during recrystallization. Mat. Res.,
2005,
vol.8, no.3, p.225-238. ISSN 1516-1439.
|
| 4094 |
LOURENçO, N.J., JORGE JR., A.M., ROLLO, J.M.A.
et al. Plastic behavior of medium carbon vanadium microalloyed steel at temperatures near gamma <-> alpha transformation. Mat. Res.,
2001,
vol.4, no.3, p.149-156. ISSN 1516-1439.
|
| 4077 |
HENRIQUES, Vinicius André Rodrigues, CAMPOS, Pedro Paulo de, CAIRO, Carlos Alberto Alves
et al. Production of titanium alloys for advanced aerospace systems by powder metallurgy. Mat. Res.,
2005,
vol.8, no.4, p.443-446. ISSN 1516-1439.
|
| 4062 |
EDMONDS, David V. and COCHRANE, Robert C. The effect of alloying on the resistance of carbon steel for oilfield applications to CO2 corrosion. Mat. Res.,
2005,
vol.8, no.4, p.377-385. ISSN 1516-1439.
|
| 4047 |
SPEER, John G., ASSUNçãO, Fernando C. Rizzo, MATLOCK, David K.
et al. The "quenching and partitioning" process: background and recent progress. Mat. Res.,
2005,
vol.8, no.4, p.417-423. ISSN 1516-1439.
|
| 4033 |
FOLETTO, Edson Luiz, GRATIERI, Ederson, OLIVEIRA, Leonardo Hadlich de
et al. Conversion of rice hull ash into soluble sodium silicate. Mat. Res.,
2006,
vol.9, no.3, p.335-338. ISSN 1516-1439.
|
| 4001 |
DRAGUNSKI, D.C. and PAWLICKA, A. Preparation and characterization of starch grafted with toluene poly (propylene oxide) diisocyanate. Mat. Res.,
2001,
vol.4, no.2, p.77-81. ISSN 1516-1439.
|
| 3996 |
SOUZA, M.F. de, MAGALHãES, W.L.E. and PERSEGIL, M.C. Silica Derived from Burned Rice Hulls. Mat. Res.,
2002,
vol.5, no.4, p.467-474. ISSN 1516-1439.
|
| 3952 |
LENZA, R.F.S. and VASCONCELOS, W.L. Preparation of silica by sol-gel method using formamide. Mat. Res.,
2001,
vol.4, no.3, p.189-194. ISSN 1516-1439.
|
| 3847 |
OLIVEIRA, M.V., PEREIRA, L.C. and CAIRO, C.A.A. Porous Structure Characterization in Titanium Coating for Surgical Implants. Mat. Res.,
2002,
vol.5, no.3, p.269-273. ISSN 1516-1439.
|
| 3795 |
TAVARES, S.S.M., NORONHA, R.F. de, SILVA, M.R. da
et al. 475 °C Embrittlement in a duplex stainless steel UNS S31803. Mat. Res.,
2001,
vol.4, no.4, p.237-240. ISSN 1516-1439.
|
| 3758 |
ZUCATO, Igor, MOREIRA, Margarete C., MACHADO, Izabel F.
et al. Microstructural Characterization and the Effect of Phase Transformations on Toughness of the UNS S31803 Duplex Stainless Steel Aged Treated at 850 °C. Mat. Res.,
2002,
vol.5, no.3, p.385-389. ISSN 1516-1439.
|
| 3704 |
VINHAS, Glória Maria, SOUTO-MAIOR, Rosa Maria, LAPA, Camila Maria
et al. Degradation studies on plasticized PVC films submited to gamma radiation. Mat. Res.,
2003,
vol.6, no.4, p.497-500. ISSN 1516-1439.
|
| 3699 |
SANTOS, Dalcy Roberto dos, HENRIQUES, Vinicius André Rodrigues, CAIRO, Carlos Alberto Alves
et al. Production of a low young modulus titanium alloy by powder metallurgy. Mat. Res.,
2005,
vol.8, no.4, p.439-442. ISSN 1516-1439.
|
| 3696 |
TARPANI, José R., BRAZ, Maria H.P., BOSE FILHO, Waldek W.
et al. Microstructural and Fractographic Characterization of a Thermally Embrittled Nuclear Grade Steel: Part I - Annealing. Mat. Res.,
2002,
vol.5, no.3, p.357-364. ISSN 1516-1439.
|
| 3694 |
CALIXTO, José Marcio F. Microcracking of High Performance Concrete Subjected to Biaxial Tension - Compression Stresses. Mat. Res.,
2002,
vol.5, no.3, p.295-299. ISSN 1516-1439.
|
| 3641 |
OLIVEIRA, Rogério Alves, KOLLER, Leopoldo Alguero and SCHAEFFER, Lirio. Evaluation of two commercially-available lubricants by means of ring test to AA 6061 F aluminum alloys. Mat. Res.,
2003,
vol.6, no.4, p.591-597. ISSN 1516-1439.
|
| 3604 |
RODRIGUES, Waldemir, ESPINOSA, Mariano Martínez and POLITO, Wagner Luis. Comparison of the compressive strength of impregnated and nonimpregnated eucalyptus subjected to two different pressures and impregnation times. Mat. Res.,
2004,
vol.7, no.2, p.241-245. ISSN 1516-1439.
|
| 3558 |
MüLLER, Arno. Matemathical description of solidification cooling curves of pure metals. Mat. Res.,
1998,
vol.1, no.1, p.29-38. ISSN 1516-1439.
|
| 3545 |
CARVALHO, Antonio Alves de, SUITA, Raphael Carlos de Sá Brito, SILVA, Romeu Ricardo da
et al. Evaluation of the relevant features of welding defects in radiographic inspection. Mat. Res.,
2003,
vol.6, no.3, p.427-432. ISSN 1516-1439.
|
| 3529 |
JOHN, Randy C., PELTON, Arthur D., YOUNG, Arthur L.
et al. Assessing corrosion in oil refining and petrochemical processing. Mat. Res.,
2004,
vol.7, no.1, p.163-173. ISSN 1516-1439.
|
| 3511 |
MARTíNEZ ESPINOSA, Mariano and CALIL JR., Carlito. Statistical fatigue experiment design in medium density fiberboard. Mat. Res.,
2000,
vol.3, no.3, p.84-91. ISSN 1516-1439.
|
| 3456 |
GOMES, Paulo de Tarso Vida, CRUZ, Julio Ricardo Barreto, RABELO, Emerson Giovani
et al. Normalizing treatment influence on the forged steel SAE 8620 fracture properties. Mat. Res.,
2005,
vol.8, no.1, p.57-63. ISSN 1516-1439.
|
| 3443 |
FIORELLI, Juliano and DIAS, Antonio Alves. Fiberglass-reinforced glulam beams: mechanical properties and theoretical model. Mat. Res.,
2006,
vol.9, no.3, p.263-269. ISSN 1516-1439.
|
| 3388 |
ORéFICE, Rodrigo Lambert and BRENNAN, Anthony. Evaluation of the interactions between polymeric chains and surfaces with different structures performed by an atomic force microscope. Mat. Res.,
1998,
vol.1, no.1, p.19-28. ISSN 1516-1439.
|
| 3382 |
D'ALMEIDA, José Roberto Moraes, MENEZES, Gustavo Wagner de and MONTEIRO, Sérgio Neves. Ageing of the DGEBA/TETA epoxy system with off-stoichiometric compositions. Mat. Res.,
2003,
vol.6, no.3, p.415-420. ISSN 1516-1439.
|
| Page 1 of 11 | [First] [Previous] [Next] [Last] |
